Fluenta meters perform with an uncertainty of less than 3% without prior calibration and even at low flow velocity.
CEESI Testing – When accuracy matters

Complete the form below to download the PDF:
You might also like…
Flaring is a growing issue in the oil and gas industry, which is under pressure to minimise the practice in order to reduce the environmental impact and, where possible, put flared gas to better use.
...In 2020, Petronas, the Malaysian government-owned oil and gas company, put into motion their aspiration to achieve net-zero emissions by 2050.
...As a specialist in ultrasonic flare gas metering, with meters capable of surpassing Nigeria’s stringent accuracy requirements, Fluenta is a major supplier to Nigeria. In 2020, we were selected for two projects that required an independent report on meter accuracy as per the DPR’s requirements. Read all about how we achieved this with a flow calibration at CEESI.
...With travel restrictions causing challenges with getting engineers to our customers installations, the UFM Manager Health Check offers remote support. This case study follows Shell’s experience with the UFM Manager Health Check to get vital information for a stakeholder report.
...This case follows Fluenta’s Malaysia team as they install Fluenta’s FGM 160 Dual-Path flare gas meter.
This whitepaper looks at the regulations behind inspection and maintenance of electrical equipment in hazardous areas, further outlining how Fluenta applies these to the FGM 160 flare gas meter.
...This whitepaper investigates our use of computation fluid dynamic (CFD) to optimize an installation.
This case study highlights the flexibility of Fluenta and our ability to work to a tight turn around time, in this case just 4 weeks from enquiry to delivery.
...This case study highlights the value of regular servicing of the FGM 160, that service goes beyond a simple verification of the meter measurement, and that proactive service by a certified engineer often saves customers money in the long-run.
...Thermal Mass meters are promoted as an alternative to ultrasonic meters for flare gas measurement, but their use comes with a number of compromises. Download this whitepaper for an analysis of the strengths and weaknesses of both measurement methods.
...In the Oil & Gas Industry it is vitally important for operators in already hazardous locations to be continually aware of the dangers around them.
...How can businesses use remote measurement technology to improve strategic decision making and effective risk control?
Challenges include ice build-up on the transducers required a custom solution for this multinational energy corporation.
How can operators use IoT and enabled devices to optimise business processes, achieve savings, and reduce emissions?
How technological advances could successfully incentivise operators to limit flaring and gain a competitive advantage.